Brochure 
User Manual
The C.Scope CAT Cable Avoidance Tool is a 3 mode detector which will detect signals radiating from pipes and cables.
Features include:
- Digital LCD display as well as audible response.
- Continuous display of battery condition.
- Continuous display of signal strength.
- Continuous display of operating mode and frequency.
- Superior 'natural' audible response rather than a digitally reproduced version.
- Excellent signal to interference ratio leaving a clear, crisp signal response.
- Provision for extra battery storage within the Cable Avoidance Tool.
- Retractable loudspeaker which can be replaced if damaged without the need to get the unit recalibrated.
- Fully weatherproof design allows easy access to batteries and loudspeaker terminals without compromising water sealing.
- Network Rail approved.
- Removable 'Wear foot'.
Specification:
Controls
1) On/Off. Press for 'on', release for 'off'. Battery check tone at switch on.
2) 3 position function select switch:
- P - Power Mode for detecting live imbalanced cables.
- R - Radio Mode for detecting re-radiated radio signals.
- G - Generator Mode for detecting conductors carrying the signal generated by the Signal Generator or the Sonde transmitter.
3) Sensitivity Control
Display
Large, easy to read liquid crystal display. Shock resistant, mounted behind a polycarbonate lens for maximum protection.
The display indicates:
- Signal Strength.
- Battery Condition.
- Confirmation of selected mode.
Frequency
P - 50-400 Hz R - 15-20 kHz G - 33 kHz
Depth of detection (Guide)
The Cable Avoidance Tool will typically detect at the following depths:
P - 3 metres R - 2 metres G - 3 metres
Batteries
8 x AA (IEC type LR6)
Typical life (guide) - 40 hours
Weight
3 kgs including batteries.
Moisture/Dust resistant to IP65
