Leica Clamp Sonde 33 - 5m
This rugged, compact Leica Clamp Sonde is ideal to trace the location of drain cameras and drain rods - it acts like a standard sonde emiting a 33kHz signal which can be picked up by most standard cable locators - the Clamp Sonde is easy to attach and transferable between cameras.
This rugged, compact Clamp Sonde is ideal to trace the location of drain cameras and drain rods. It acts like a standard sonde emitting a 33kHz signal which can be picked up by a standard cable locator. The Clamp Sonde is easy to attach and transferable between cameras.
You can locate and determine the depth of your sewer or pipe inspection camera. When attached to a camera system and inserted into a drain, sewer or pipe, the signal transmitted from the Clamp Sonde can be located using any standard cable locator. This is useful in locating blockages and obstructions in nonmetallic pipes.
The unique Clamp Sonde offers an unprecedented level of functionality and flexibility.
Once attached to the camera cable, rod or similar, the Clamp Sonde with travel along the utility under investigation. Using a Leica DD100 or DD200 series cable locator to locate it on the surface, you can trace the path of the camera or drain rod. Commonly drain cameras with integrated sondes can not use the camera and sonde simultaneously due to interference. With the Clamp Sonde attached, the camera can be utilised at the same time.
The Clamp Sonde is ideal for:
- Tracing the path of a drain camera from above the ground
- Locating issues found on camera within the drains
- Locating or tracing non-metallic pipes that don't produce a signal.
The depth range of the Clamp Sonde is up to 5 metres is 40mm (1.57”) diameter and clamps onto most 12mm (0.74inch) flexible rods.
Please Note: You will need to use a cable locator that has depth estimation on to get a depth reading.