Menu
Cart 0
Radiodetection RD7100PL - Radiodetection

Radiodetection RD7100PL

Radiodetection

  • £1,397.00
Price ex VAT
  •   £1,397.00  inc VAT  




The RD7100 range offer the power of Radiodetection’s most advanced locating technologies, with each model optimized for a single industry.

Users benefit from the simplicity of having menu options and capabilities matched to their requirements.

All RD7100 locators come with Radiodetection’s pioneering  features, such as StrikeAlert, Compass Orientation and  depth measurement as standard and each model of  RD7100 also benefits from being optimized for a specific industry:

CONSTRUCTION: RD7100SL Accurate and simple to use, the RD7100SL comes with four active and two passive frequencies that cover the majority of site locating tasks. A rugged, IP65 rated casing along with a high contrast screen make it suitable for use in all weather conditions.

WATER & PIPELINE: RD7100DL(G) With four sonde frequencies, the RD7100DL can be used to trace deep pipes made from a variety of materials including: cast iron, clay, fiber, concrete and brick. Additionally, it can be used to locate Cathodic Protection System (CPS) signals applied to pipelines.

POWER: RD7100PL(G) Designed for use in dense infrastructures where signals from high voltage equipment and cables can be confusing or overwhelming.  Dynamic Overload Protection reduces the effect of interference, while Power Filters can be used to establish if a single large power signal comes from one source or from the presence of multiple cables.

TELECOM: RD7100TL(G) RD7100TL features higher frequencies to locate high impedance cables amongst large bundled pairs and sonde frequencies for duct and conduit tracing. Higher frequencies can also be used to trace sheathed domestic cables without grounding connections. Cable sheath faults can be located to within 4" (10cm) using 8kHz Fault Find mode with a Radiodetection A-Frame.

Powerful locating at your fingertips
Interface consistency with our previous locators allows you to transfer knowledge and reduces retraining costs.
Menu options and capabilities are matched to specific industries simplifying use.
RD7100’s ergonomic balanced design and light weight (4.2lbs / 1.9kgs) ensures it is comfortable to use for extended periods.

On-site operator confidence
  • StrikeAlert™ in active and passive locating modes gives visual and audio warnings of shallow cables reducing the risk of accidents.
  • TruDepth™ ensures depth readings are only given when RD7100 is correctly oriented ensuring you can be confident in the result.The integrity of the measurement system can be confirmed on-site.  Self-test applies signals to the locating circuitry as well as checking display and power functions.
  • ECERT™ allows you to verify and certify the calibration of your locator over the internet using RD Manager PC software package without returning the unit to a service center.
Simplify complex locates
Simultaneous display of depth and current measurements gives you confidence you are following the correct line.
Dynamic Overload Protection filters out interference, enabling use in electrically noisy environments such as near substations or overhead power lines.
Industry specific frequencies and modes simplify menu options and reduce complexity.
Power Filters™ uses the harmonic properties of mains networks to establish if a strong power signal comes from one source of multiple cables.

Guidance Mode allows you to quickly follow utility paths
Guidance Mode allows you to rapidly find and follow the path of a buried utility. Directional information is displayed alongside proportional distance arrows to help find the utility and then keep you on its path. The simultaneous display of depth and current information gives confidence the correct utility is being traced even in congested networks. For rough or uneven terrain differentiated audio tones can be used, freeing the user to concentrate on potential hazards.

Peak+™ Mode combines accuracy with speed
Combine the accuracy of Peak locating with the rapid ground coverage of Guidance arrows in the new Peak+™ mode. A single key press lets you check for distortion by comparing Null with Peak.

Power Filters™ pinpoint and discriminate between power cables (PL models)
When a signal transmitter can’t be connected, tracing individual power lines through complex networks can be a real challenge. Conflicting or powerful signals confuse, or combine to create a wash of signal.

With a single key press you can now utilize the harmonic properties of power signals to establish if a signal comes from one source, or from multiple cables, then trace and mark their routes.

Li-Ion rechargeable battery options
Lithium-Ion rechargeable battery options for both locator and transmitter provide extended runtime with reduced running costs.

Radiodetection RD7100 Series Options

Radiodetection RD7100 Series Options

All images ©2016 Radiodetection Limited

Subtech Safety Limited are official Distributers for Radiodetection Limited products

Please contact us for products not advertised on this website as we may be able to supply


We Also Recommend
Celebrating over 15 Years in Business and over 40 Years combined Knowledge in Servicing & Repair