01905 621553

Description

The MXL4 Precision Locator represents a significant advance in cable detecting and tracing capabilities.

Two versions of the MXL4 are available; the MXL4-D which has full data logging capability, and the MXL4-DBG which has full data logging capability, Bluetooth™ connectivity and GPS.

Innovative new features have been introduced enabling the MXL4 Locator and MXT4 Transmitter to provide high-end precision performance and a far more flexible approach to pipe and cable location.

IMPROVED PERFORMANCE
The MXL4 is able to quickly and accurately detect, pinpoint, trace and identify the widest range of pipes and cables.

OVERLOAD PROTECTION
Optimised Locator Sensitivity and Noise Rejection means that the MXL4 can deal with the highest levels of background interference found, allowing even the weakest of signals to be detected successfully.

MULTI-FREQUENCY
The MXT4 Transmitter now has a greater range of transmitting frequencies allowing improved long distance tracing and utility identification, even on the most congested of sites. A range of frequencies from 512/640Hz up to 131kHz and including the simultaneous dual-frequency 33kHz and 131kHz signal output is ideal for maximising the number of buried services that can be energised and then detected. The MXL4 can apply these frequency signals without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.

DEPTH MEASUREMENT
The MXL4 when used alongside an MXT4 Transmitter will measure and indicate the depth of buried pipes, cables and sondes at the push of a button.

SIGNAL CURRENT MEASUREMENT
The MXL4 can monitor the true strength of the MXT4 Transmitter signal applied to a buried service irrespective of its depth. This is ideal for identifying the layout of a pipe or cable network.

INTELLIGENT NEW FEATURES:

ALARM ZONE
AlarmZone™ alerts operators to the presence of particularly shallow pipes or cables with the exact trigger depth adjustable by the user to best suit local requirements.

DYNAMIC SWING SENSOR
The Dynamic SwingSensor which gently alerts the operator if the locator is being swung excessively, potentially compromising the accuracy of any locates.

PEAKHOLD
PeakHold allows operators to quickly and confidently pinpoint the exact position of buried services

DATA LOGGING
The MXL4-D and MXL4-DBG Locators have full data logging capability. A years worth of data can be stored, in normal usage, on both the Locator and the MXT4 Transmitter.

DATA LOG TRANSFER via USB
This can be conveniently transferred at any time to supervisors for analysis via a USB cable to a PC (or wirelessly via Bluetooth™ from the DBG model only to a PC, tablet or smartphone).

DATA ANALYSIS
C.SCOPE PC ‘TOOLKIT’ and ‘RELAY’ Smartphone App
The free-to-download C.Scope PC Toolkit and C.Scope Relay smartphone App analyses the stored data-logs into charts and graphs that illustrate all aspects of the use allowing training requirements to be quickly identified.

GPS
The MXL4-DBG with in-built GPS allows a record to be kept of exactly where the Locators have been used that can then be viewed in partnership with Google Earth™ or Google Maps™.

Twelve months of GPS data is stored, in normal usage. This can be conveniently transferred at any time via a USB cable to a PC or wirelessly via Bluetooth™ to a PC, tablet or smartphone to supervisors for analysis. The free-to-download C.Scope PC Toolkit and Relay smartphone App analyses the stored data.

Additionally, the Locators can be paired to third party GPS Survey equipment, via the Locators in-built Bluetooth™ facilitating ‘one pass’ underground utility surveys to be undertaken.

CALIBRATION
The MXL4 Cable Avoidance Tools do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.

AUTOMATIC DAILY SELF TEST (ADST)
The MXL4 Locators perform an Automatic Daily Self Test (ADST). The ADST checks the functionality of the locator including the receiving aerials each day when it is first switched on. The MXT4 Transmitter also performs a comprehensive Automatic Daily Self Test (ADST)

At the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.

The result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.

PRODUCT VALIDATION CERTIFICATION
These test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available. The PC Toolkit can also be used to view and print a copy of the original factory Calibration Certificate.

C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal requirements.

HIGH RESOLUTION BACKLIT DIGITAL DISPLAY
The MXL4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates detection mode, signal peak level, depth, signal strength and battery condition. It also displays the Automatic Daily Self Test results.

DETACHABLE SPEAKER
The speaker can be easily detached for use in noisy work environments.

ROBUST AND DURABLE CONSTRUCTION
The MXL4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.

SERVICE
A complete covers off service & maintenance package is available for those customers who require it from C.Scope Authorised Service Centres.

THREE YEAR WARRANTY
The MXL4 comes with a three year Warranty (conditions apply).

Product Details

MXL4 Multi Frequency Cable Avoidance Tool

  • Power Mode
  • Radio Mode
  • Transmitter Mode:
    Simultaneous 33+131kHz signal detection for utility avoidance
    33kHz signal detection for all purpose tracing and utility avoidance
    131kHz for optimum detection of short length, small diameter or unearthed cables

    8kHz signal detection for tracing over longer distances
    Ultra low 512Hz signal detection for specialist tracing
    Ultra low 640Hz signal detection for specialist tracing
  • All Scan Mode
  • Accurate Depth Indication
  • Signal Current Measurement
  • Overload Protection
  • Alarm ZoneTM
  • Peak Hold
  • Dynamic Swing Sensor
  • Automatic Daily Self Test
  • Data Logging of all Locator activity
  • Data Transfer by USB (BluetoothTM option)
  • In-Build GPS position logging (optional)
  • Connectivity to Survey level GPS products (option)
  • High resolution Liquid Crystal Display
  • No periodic Calibration required
  • Product Validation Certificate available
  • Network Rail Approved
Cable Avoidance Tools
CXL4
CXL4-D
CXL4-DBG
DXL4-D
DXL4-DBG
MXL4-D
MXL4-DBG
Power Mode
Radio Mode
Generator / Transmitter Mode
33+131kHz
131kHz
33kHz
8kHz
512Hz
640Hz
All Scan Mode
Accurate Depth Identification
Signal Current Measurement
Overload Protection
AlarmZone™
Peak Hold
Dynamic Swing Sensor
Automatic Daily Self Test
Product Validation Certificate
Data Logging
Data Logging Rate once per second
2Gb Memory
Data Transfer via USB
Data Transfer via Bluetooth™
External Survey Level GPS via Bluetooth™
In-Built GPS position logging
High Resolution Backlit Liquid Crystal Display
No Periodic Calibration*
Three Year Warranty**
Batteries*** 8 x AA (LR6)
IP65
Network Rail Approved

= Not Available
= Available - enabled by default

* No Periodic Calibration. The XL4 Locators do not require periodic recalibration. A Product Validation Certificate can be printed using the PC Toolkit.

C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal regulations.

** Three Year warranty. Conditions apply.

*** Batteries. The XL4 Locators use 8 x AA LR6 Alkaline or NiMH Rechargeable batteries sealed in a secure, fitted battery compartment.
The battery pack will typically provide approximately 40 hours of service depending on use. The battery compartment also houses a spare battery holder.


Signal Generators
SGA4
SGV4
MXT4
One Watt Power
Power Levels 2 4 4
Generator / Transmitter Frequencies
33+131kHz
Combined Induction Mode
33kHz only 33kHz
+
131kHz
33kHz
+
131kHz
33+131kHz
Combined Connection Mode
131kHz Connected and Induced
33kHz Connected and Induced
8kHz Connected and Induced
512kHz Connected only
640kHz Connected only
Pulsed / Continuous Output Signal
Signal Connection Modes
Direct Connection
Wraparound
Induction
Automatic Daily Self Test
Data Logging
Data Transfer via USB
High Resolution Backlit Liquid Crystal Display
No Periodic Calibration*
Three Year Warranty**
Batteries*** 4 x D (LR20)
In Built Accessory Tray****
IP65
Network Rail Approved

= Not Available
= Available - enabled by default

* No Periodic Calibration. The SGA4, SGV4 and MXT4 do not require periodic recalibration.

Product Validation Certificate can be printed using the PC Toolkit.

C.Scope authorised Service Centres are also able to provide third party Test and Calibration Certification should you require it to comply with client or internal regulations.

** Three Year warranty. Conditions apply.

*** Batteries. 4 x D LR20 Alkaline or NiMH Rechargeable batteries housed in a secure battery compartment.

**** Accessory tray includes Direct Connection Lead, Auxiliary 10m Earth Lead, Connection Magnets, Earth Stake and Instruction Manual.

MXL4 Multi Frequency Cable Avoidance Tool

  • The MXL4 Multi Frequency Locator is available in two model types:

    • MXL4-D Precision Locator
      The C.Scope MXL4-D is a high performance digital multi-frequency Precision Pipe & Cable Locator with in-built Data Logging.
    • MXL4-DBG Precision Locator
      The C.Scope MXL4-DBG is a high performance digital multi-frequency Precision Pipe & Cable Locator with in-built Data Logging, Bluetooth™ connectivity and GPS tracking.

    Both these products are designed for use with an MXT4 Multi Frequency Transmitter.

    Product name
    MXL4 Precision Locator

    Part Nos.

    • MXL4-D
    • MXL4-DBG

    Controls

    • On/Off Switch: Spring loaded trigger switch under handle
    • Function Select Switch (FOUR position): P. Power Mode; R. Radio Mode; T. Transmitter Mode; A. AllScan Mode
    • Sensitivity Control
    • Depth Measurement Button. Push button for live display of depth
    • Current Measurement Button. Pushbutton for live display of Transmitter current
    • Frequency Select Button. Pushbutton for Transmitter Mode frequency selection

    Audio Indication
    Removable and user replaceable loudspeaker module

    Visual Indication
    Multi-segment Liquid Crystal Display indicating:

    • Signal Strength
    • Mode selected
    • AlarmZone™
    • Battery Condition
    • Self Test Indicator
    • In Transmitter Mode, Frequency selected; Depth Measurement; Signal Current Measurement
    • GPS signal detected (MXL4-DBG only)
    • Bluetooth™ activated (MXL4-DBG only)

    Data Logging
    Internal capacity for storing over 12months of data (in normal use) logged once per second. Data logged includes:

    • Time/Date
    • Mode Sensitivity Level
    • Received Signal Level
    • Frequency Depth
    • Signal Current Measurement
    • Self Test Result
    • Swing Indicator
    • GPS position (MXL4-DBG only)

    Bluetooth™
    Bluetooth v2.1 (for Android) and v4.0 (for Apple iOS)

    GPS
    GPS/QZSS/GLONASS/SBAS

    Data Connector
    Standard USB Mini B connector in battery compartment. USB 2.0 Compatible

    Self Test
    Automatic Daily Self Test

    Swing Indicator
    Audio beep to indicate incorrect use of the Locator

    Transmitter Mode Frequencies
    Simultaneous 131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz; 8,192Hz; 640 and 512Hz

    Construction
    Case moulded from high impact plastic. Designed to withstand 1m (3’3”) drop onto a hard surface

    Weight (including batteries)
    2.65kg (5lb 13oz)

    Dimensions
    720mm x 280mm x 65mm (28.3” x 11” x 2.5”)

    Performance

    • Locate Accuracy: better than 10% of depth
    • Depth Accuracy: ±5% @ 1m (3’3”)
    • Line Depth Measurement Range: 0.1m to 9.99m (4” to 32’)
    • Line Depth Resolution: 0.1m (0.4”)
    • Sonde Depth Measurement Range: 0.1m to 9.99m (4” to 32’) depending on Sonde type
    • Sonde Depth Resolution: 0.1m (0.4”)
    • Current Measurement: 0.01mA to 100mA

    Battery Type
    Internal 8 x ‘AA’ (LR6) cells (either alkaline non-rechargeable or NiMH rechargeable)

    Battery Life
    40 hours intermittent use at 20ºC (68ºF) using alkaline cells

    IP Rating
    65

    Network Rail Approved

    Notes
    Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Locators are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/30/EU (EMC). Compliance has been demonstrated by testing representative samples to the relevant harmonised standards. All C.Scope Locators comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).

More Products in this range